Active Cooling
The 224 TEC TO-Can LaserMount provides active TEC cooling for TO-5.6 or TO-9 lasers. The device is inserted into a socket and clamped to the cold plate by a machined stainless steel bracket.
The 224 is designed for post-mounting (post-mount not included), with 8-32 and M4 threaded holes on the bottom of the mount.
A cover plate is included to minimize the impact of air thermal gradients on the temperature of the device. A nitrogen purge nipple on the side of the mount can be used to prevent condensation when operating below the dew point. A 4mm banana jack on the side of the mount provide a convenient wrist strap connector, or can be used to ground the mount to an optical table.
Specifications
| Laser Package Supported | 5.6mm and 9mm TO-Can, 3&4 pin |
| Input connector | |
| Laser Diode | DB-9, male |
| Mount TEC | DB-15, male |
| Temperature Control | |
| Temperature Range(°C) | +15 to +88 |
| Sensor Type | 10 kOhm Thermistor |
| TE Module Imax(A) | 3.1 |
| TE Module Vmax(V) | 2.6 |
| TE Module Qmax(W) | 4.7 |
| General | |
| Dimension(H x W x D)[mm] | 50.8 x 50.8 x 50.8 |
| Mounting holes | 8-32 thread hole (x4) M5 thread hole (x4) |
